This PR adds a new XML property for the player's colour. It is 0 by
default, but you can change it to any colour ID. For example, making
the player use the trinket color is `<PlayerColour>3</PlayerColour>`.
This is mostly a quality-of-life addition, as the player's colour is
always 0 unless changed by scripts. A lot of levels which use different
player colours use an intro script which both changes the player's
colour and sets their respawn colour, which works great for finished,
completed levels, but makes playtesting a little more annoying as they
will spawn in as the wrong colour. Adding a level property for the
default player colour fixes this annoyance.
Additionally, this changes the behavior of `restoreplayercolour`. This
command used to set the player's colour to 0 (ignoring the respawn
colour, so when Viridian would die, they would revert to the respawn
colour). Now, it sets both Viridian's colour AND the respawn colour to
what was present in the level file. This way, you can temporarily
change the player colour using the script commands, and then use
`restoreplayercolour` to revert back to what the player colour
normally is.
The start point colour has also changed, to show the player colour
instead of always colour 0.
Like most changes like this, a way to change this in-editor does not
yet exist, but is planned for the future.
If you push a button to set a controller binding, you may either hear
one Viridian squeak, two Viridian squeaks (a louder one), or Viridian
doesn't stop squeaking until you let go of the button. While you hear
the continuous squeaking, your save file is also repeatedly saved.
There are two small bugs at play here:
- the squeak is actually played in two different places at the same
time (both in titleinput() whenever a button is pressed, and in
updatebuttonmappings() when a mapping is succesfully changed)
- titleinput() doesn't register that a button is held down and applies
the button (and saves to file) every frame for as long as the button
is held
This commit fixes both these issues. Now a single button press always
causes one squeak, and only if the bindings actually changed. Your save
file is also no longer saved repeatedly from holding down the button.
In an effort to remove magic numbers, I've given every entity type a
name. Hopefully I didn't miss anywhere.
Also, add `createentity` case 100 for backwards compatibility.
Co-authored-by: NyakoFox <nyakowofox@gmail.com>
Co-authored-by: Dav999 <dav999.tolp@gmail.com>
This argument forces the textbox position, meaning it won't be moved
to be inside of the bounds of the screen (nor have the 10 pixel padding
on each side.)
This replaces all instances of unlocking all rooms on the map with calls
to map.fullmap(), for consistency.
This also fixes two comments that got swapped around in startgamemode().
I don't know how that happened.
[skip ci]
Some discussion on the Discord server resulted in this change. It's a
quality-of-life improvement where, if the game is in slowdown mode, it
will return to 100% speed for the duration of the death animation.
The reasoning is obvious. There is nothing to do during the death
animation, so making it take longer during slowdown is just an annoyance
to the player, almost a penalty for them using an accessibility option.
This is the same reason why slowdown no longer applies in menus, etc.
This makes it so that it is possible to obtain the Master of the
Universe trophy/achievement, usually unlocked by beating No Death Mode,
outside of NDM.
There are several conditions that need to be met:
1. The game needs to be started from a new game and cannot be from
loading a save.
2. Accessibility modes (invincibility and slowdown) must never be
enabled.
If either condition is violated, then the boolean that keeps track of
NDM eligibility will be set to false.
Currently, you can change platform speed, but not enemy speed, which is
always hardcoded to be 4. This commit fixes that, by adding the
"enemyv" property, which is an offset to the speed of 4. Since it
defaults to 0, older levels are not broken by this change.
Just extending the selection background left by one pixel so there's
not one pixel of black background to the left of a selection that
starts at the beginning of the text, and so some characters being
selected show up better (particularly where there's a long vertical bar
at the first pixel). We shouldn't be overlapping any part of the
previous character, since every character normally has a pixel of
spacing on the right.
Decided to implement it anyway since the broken behavior (selection
length always being 0, at least on Windows) may get fixed later in SDL,
so let's do it right in one go.
This shows the uncommitted text in a box in the bottom left corner.
This doesn't show the selection (defined by the start and length fields
in the event) yet, but this is already much better than it was on its
own, and I don't know how urgent the selection is since it's broken on
Windows anyway.
When inputting uncommitted text from an IME, this is now stored in a
std::string imebuffer, just like keybuffer. It also enables extended
editing events, so text longer than what fits in the standard editing
event is also supported. This commit does not yet display the text
onscreen.
This fixes a regression from 2.3. Consider the following diagram:
CC
X CC
<<<<
"C" indicates one tile of a checkpoint entity, "X" indicates a spike
tile, and "<" indicates one tile of a conveyor entity that has the
default speed (4 pixels per frame) going leftwards.
Now consider if the player were to touch the checkpoint and die. In 2.2,
they would be able to escape from the spike by holding right. But in
2.3, they would not be able to, and would die from the spike
continuously with no escape.
This happens because in 2.2, the player would spawn a couple pixels off
the surface, and this gained them an extra frame of movement to move
away from the conveyor. 2.3 places the player directly on the ground,
moving them one frame earlier and thus forcing them to their doom.
Now consider the following diagram:
CC
X CC
<<<<
The difference with the previous diagram is that this time, the spike is
one tile closer. This time, there is no escape in 2.2 and you will
always die no matter what.
By the way, both diagrams have the same behavior if the conveyor is
rightwards and if everything is flipped upside-down. Thankfully, it
doesn't seem to be direction-dependent.
The reason 2.3 lowered the player onto the surface was for consistency
(see PR #502), and I don't want to undo that. So I think the best
solution here is to re-add the extra frame of control by conveyors only
moving the player after lifeseq has advanced enough.
This fixes a bug where fast-forward wouldn't work in 30-FPS-only mode.
This is because the 30-FPS-only code has a hardcoded check for the
number 34, as in 34 milliseconds must pass before the next frame can
advance. This is why slowdown still worked, because slowdown means
you're waiting longer than 34 ms anyways, but fast-forward tries to wait
for only 1 ms, which wouldn't work if the 34 limit was still enforced.
So instead, swap out the 34 with game.get_timestep() and this will be
fixed.
Fixes#1185.
A minor gripe, but one thing I didn't notice with commit
b4579d88d3 is that it now results in two
dialogs if data.zip is missing: The first being the "data.zip is
missing" dialog, and the second is the generic "Unable to initialize
filesystem" dialog.
So just bail early if data.zip can't be found, it's going to take the
error path in main() and also bail regardless.
Commit 53d725f78a, intended to fix an
overzealous commit, was itself overzealous. This is because it applied
to all entities when it should only apply to entity-emitting entities.
To fix this, `entityclonefix` needs to no-op if the entity is not an
entity emitter.
Fixes#1176.
Commit 4f881b9e26 fixed a duplication bug
where enemy movement types 10 and 12 would keep duplicating itself on
every frame if it was spawned outside of the rooms they were supposed to
be used in the main game. The downside was that this was an overzealous
fix and unintentionally broke some cases that were working before.
As brought to my attention by Ally, you can no longer place an edentity
with a `p1` of 10 or 12 (translating to movement type 10 or 12) in the
proper rooms and have it spawn perfectly working entities (that don't
clone on themselves every frame), whereas you could in 2.2. This is
considered a regression from 2.3.
So the problem here is that the reason the two emitter entities were so
dangerous outside their respective rooms is because the entity they
spawned (`createentity` entry 1) checked if it was in the correct rooms,
and if so, it would call `setenemy`, and `setenemy` would set the
`behave` attribute (movement type) correctly, and so the new entity
would have a different `behave` that wouldn't be the exact same `behave`
as the previous one, so it wouldn't be a duplicate emitter entity.
The previous `entityclonefix` worked okay for entry 1, because it would
only be run if the room checks failed and `setenemy` wasn't called, but
it broke a previously-working case for entry 56, because it was always
run for entry 56.
So the best way to check if we have a dangerous entity is not by seeing
if it is still `behave` 10 or 12 at the end of entity creation - because
10 or 12 could be harmless under the right conditions - but by checking
if the right conditions were satisfied, and if not, then neutralize the
entity.
I considered making the emitter entities work everywhere - which would
be simpler - but I didn't want to go too far and add a new feature,
especially in a minor release.
This fixes a minor issue where if you had a zip in the levels list, but
then removed it, it would still show up in the levels list after
reloading it (if you also had a .vvvvvv file named the same as in the
zip) even though it shouldn't.
Thankfully, this didn't lead to a memory leak or duplicate zip mounts or
anything like that, because PhysFS ignores mounting a zip if it's
already mounted.
This also didn't result in a level entry from a zip persisting after
removal after reloading the levels list, because the entry would be gone
due to the .vvvvvv file not being found.
The intention of the `-console` argument was to enable seeing console
output on Windows without having to use workarounds. However, this
didn't actually work for arguments like `-addresses` and `-version`,
because the program would exit first before it could get the chance to
create the console.
The other issue is that the console closes too quickly before output can
be read by the user. So to fix that, we must hold it open and let the
user close it when they want to by waiting for an enter press from
STDIN.
This fixes a regression from 2.4 where the foreground wouldn't update
after using the G keybind to go to a room, requiring the user to touch a
tile to update the rendering.
This fixes a bug report from Elomavi that you could still softlock from
warping to ship and incrementing the gamestate by pressing ACTION, which
is diverging behavior from how it was in 2.3. Warping to ship and
incrementing by pressing ACTION is useful behavior for a couple niche
speedrun categories.
I had already fixed this earlier by ignoring state locking if
glitchrunner 2.2 or 2.0 was enabled, but softlocks could still happen
because having glitchrunner mode off still enabled you to increment the
gamestate when otherwise unintended. Softlocks shouldn't happen.
But without removing state locking entirely, I've chosen a middle ground
where it will only be disabled if you press ACTION. That signifies
intent that you still want to perform state incrementing glitches even
with glitchrunner mode off (but in the future it could be considered a
2.3/2.4 glitch that could be patched and made re-enable-able). That way,
casual players can't interrupt the warp to ship by accident (unless they
accidentally press ACTION) while softlocks will be removed.
For localization, the "Thanks for playing!" text was split into two
lines, when it was originally one line. Unfortunately, it was not
updated to account for Flip Mode, so in Flip Mode, it looked like
"playing! Thanks for".
This has been fixed.
If there was a scaling mode value (serialized in the XML as <stretch>
for legacy reasons) that was not 0 or 1 or 2, then the rectangle with
the stretch information would not be initialized by get_stretch_info,
which would lead to a crash, either from dividing by zero (most likely)
or from reading an uninitialized value.
To fix this, when reading <stretch>, normalize it to a sane default if
the value is otherwise bogus. And for good measure, an assertion is
added in get_stretch_info() if the value is still somehow bogus.
Fixes#1155.
This is just a small visual fix to an inconsistency with textbox
colors in simplified scripting. The `reply` command is meant to be
used for the player, and always correctly positions it above the
player, while the `say` command may be used to generate a cyan textbox
that's positioned above a cyan non-player crewmate. However, the color
for both textboxes is always `cyan`, so the `reply` command doesn't use
the (normally identical) `player` color even though all its other
behavior (squeak, position) does. Now that customized textbox colors
were added in 2.4 (#910), it's a shame that this distinction isn't
made between `cyan` and `player`, so this change addresses that (before
we're stuck with levels that change `cyan` but not `player`).
